WESTERN IMPACT
Westernize your UTV
PLEASE CONTACT ME FOR MORE INFORMATION
UNIQUE FEATURES
BIG PLOW PERFORMANCE FOR YOUR UTV
WESTERN® IMPACT™ UTV snowplows are professional-grade plows designed and built exclusively for utility vehicles. The tough, 6' wide v-plow easily adapts to handle 5' sidewalks and gates in angle, scoop or V mode. The 6' straight blade is a commercial grade snowplow in a lighter-weight package that fits more UTVs. Now you can have year-round UTV fun and get your winter work done too.
UNIQUE FEATURES
UNIVERSAL FEATURES
FEATURED ACCESSORIES
SPECIFICATIONS
Hooking up the IMPACT™ v-plow or straight blade is simple. With the receiver brackets installed on your utility vehicle, either drive in or manually push the plow into the receivers. Push up on the headgear to engage the hitch pins in the receiver holes, then slide the handle to lock the hitch pins in place. Finally, connect the electrical plug.
Detaching the plow is just as easy. The receivers are removable, to maintain ground clearance.
The removable receivers and low profile undercarriage provide exceptional ground clearance and maximize the ramp angle, so your unit will be trail ready when the plow is not attached.
We manufacture our own hydraulic components to ensure the highest standards of quality and reliability, so that you get a hydraulics system that's not only fast and responsive, but that's built to last season after season.
Fully enclosed components are protected from the elements.
Hydraulic Scrape Lock holds the blade down for more efficient scraping and clean back dragging.
The IMPACT™ straight blade UTV plow features a 14-gauge powder coated steel moldboard that is 6' wide and comes with a standard 5" steel cutting edge.
Four vertical ribs and high-strength, low-weight, alloy steel components ensure the plow is strong enough for commercial operation and light enough to fit more UTVs.
Two heavy-duty coil springs protect your plow and UTV by allowing the whole blade to trip when striking obstacles.
The IMPACT™ flared v-plow blades go from a 25¼" center height to a full 29¼" at the outer edge. The 14-gauge powder coated steel flared moldboard is 6' wide and comes with a standard 5" high-carbon steel cutting edge, reducing wear and extending the life of the blade.
Six vertical ribs, coupled with high-strength, low-weight, alloy steel components, provide a favorable strength-to-weight ratio, keeping stress off of the UTV frame.
A ¾" diameter, steel center pin resides within a three-connection-point hinge, keeping the wings tight for improved performance.
Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles. Whether in V, scoop or straight blade configuration, the trip-edge helps protect the plow, the truck and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.
A standard feature on the IMPACT™ UTV v-plow, UltraLock double-acting cylinders allow the operator to use the v-plow in straight blade mode by locking the wings together instead of having to toggle each wing independently.
The double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.
For the cleanest pass in any position, the IMPACT™ UTV v-plow has a snow control deflector over the center hinge to help prevent snow from being lost over the top.
When the fully angled or in V mode, the IMPACT™ UTV v-plow plowing path is 5' wide, and 4'7" in scoop. For UTVs with a wider wheel base, a width-adjustment setting is available to make your plowing path wider in these positions. Using the alternate setting, the plowing width is 5'6" when fully angled or in V, and 5'1" in scoop.
The intuitive UTV-specific hand-held control lets you raise and lower the plow, and position the blade in V, scoop, angle and straight modes. An optional joystick control is also available for easy blade control operation when wearing gloves.
The ULTRAFINISH™ baked on powder coat with epoxy primer is standard on all WESTERN® plows, providing outstanding protection against wear and rust.
The WESTERN® Scrape Lock system locks the plow in any position you put it in to give you a cleaner scrape, especially while back dragging. With the plow locked in place, Scrape Lock gives you the performance of a larger plow without the extra weight and without the need to push any extra buttons.
The exclusive WESTERN® SECURITY GUARD™ snowplow anti-theft system is a safe and secure way to electronically lock your snowplow when it is detached from your truck as a deterrent from theft.
FEATURED ACCESSORIES
Get more jobs done faster with plow wings. Available for the IMPACT™ UTV v-plow, these wings add more carrying capacity. Made of 14-gauge steel with high strength steel ribs, the wings are a perfect compliment to an IMPACT UTV v-plow blade. No installation required - the innovative design means quick and easy attach/detach.
The IMPACT™ UTV light bar accessory features twin LED headlamps to help keep you on the right path. Like IMPACT UTV snowplows, the light bar accessory is sturdy and engineered to stand up to the rigors of commercial plowing operations.
Protect your plow and the road. Ride above the uneven surfaces of gravel and dirt with plow shoes. The cast iron construction and shape ensures that your plow glides over gravel and dirt at the perfect height. The shoe kit extends cutting edge and base angle life when plowing rocky or abrasive surfaces.
SPECIFICATIONS
MODELS
BLADE WIDTH
BLADE HEIGHT
BLADE GAUGE
TRIP SPRINGS
VERTICAL RIBS
LIFT CYLINDER
ANGLING RAMS
PLOWING WIDTH (FULL ANGLE)
APPROX. WEIGHT (LESS MOUNT)
DISC SHOES
CUTTING EDGE
MOUNT TYPE
V-PLOW
6'
29¼" at end
25¾" at hinge
14
2
6
1½" x 6"
1" x 8¾"
5' full angle
4'7" scoop
5' full V
354 lb.**
Optional
¼" x 5"
UTV Mounting System
STRAIGHT BLADE
6'
23½" at end
14
2
4
1½" x 6"
1" x 7"
5'4" full angle
261 lb.**
Optional
¼" x 5"
UTV Mounting System
**Plus vehicle mount